The joint compound is dried and checked for any imperfections. To make sure that every area is evened out, the contractor overlaps each vertical pass. The contractor starts from the top and slowly smooths the surface section by section. Once the joint compound is applied, a squeegee knife is used to smooth it out further. The application should be smooth and even ensure a consistent finish. The joint compound is usually slightly thinned and applied using a heavy-nap paint roller. The professional works in small sections and smooths out the mud before it dries. Apply the joint compoundĪfter the primer dries, all-purpose mud is applied to the surface. After that, a high-quality drywall primer is applied on the surface and left to dry. Also, any holes or nicks will need to be patched/repaired using a joint compound in case there are any visible damages. For new walls, cleaning may not be necessary. Preparing includes cleaning the surface to get rid of dust and debris if the walls are older. Preparing the surfaceīefore skim coating, the walls, prepping should be done first. Whether you are building a new home or remodeling your current one, the following steps should be followed during skim coating. However, if you plan to DIY, you must know exactly what you are doing to avoid making mistakes. Having a general overview of the skim coating process is essential even if you plan to hire a professional to do the work. The paint roller will be used to apply primer before and after skimming to ready the surface for texturing or painting. The putty knife is used to fill in holes with the mud and smooth the surface. A drywall sealer will prevent the board from moisture, while a mud pan will hold the drywall joint compound.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |